200% pay-back

Hybrid-solar-panel   Double-functioning   Thermodynamic-photovoltaic   Solar-tracker   Rotation-device   Energy-efficiency

Distributor Pipe SS

Technical Specification

Inlet Pipes

Material: SS 304 Stainless Steel

Treatment: TIG Welded and Hydraulic Proofed

2 dimension:

a) 22 x 1.5 mm

b) 28 x 1.5 mm

Length  2000 mm with 15 mm exits for panel connections

a) 10 exits c/c = 200 mm

b)   8 exits c/c = 250 mm

c)   6 exits c/c = 333 mm

Two types of exits

a) Single exits

b) double exits

Thermo-Isolation

ISOPIPE TC is a new generation of high perfomance insulation. The closed elastomeric rubber insulation is a lasting solution against mould.

It has outstanding thermal protection and because of this its surface is absolute condensation resistant.

Continued supervision and factory tests guarantee the outstanding perfomance.

Density: ISOPIPE TC insulation is produced with a density of 50-65 kgr/m3.

Proper Fit

Thermal Conductivity

As air (closed cells) & elastomeric material are poor conductors of heat, ISOPIPE TC significantly reduces the transfer of heat through its insulation.

- λ = 0,035W/mK at 0oC

- λ = 0,036W/mK at 10oC

- λ = 0,037W/mK at 20oC

- λ = 0,040W/mK at 40oC

Fire Rating

ISOPIPE TC has a very good fire behavior. It will not drip flaming particles nor will it spread flames. It provides safe insulation; an ideal choice for residential & public buildings.

- Class 0, Class 1

- B - s3, d0

UV protection cover

Our UVPLUS cover protection is an aluminium outer cover composed of three layers (polyester, aluminium and polyethylene).

These layers provide resistance both to ultraviolet rays and atmospheric agents.

Added Benefits

- High UV protection with reflective properties

- Reduces risk of under insulation corrosion

- Chemical and oil resistant

- Fast and easy installation, without requiring special equipment

- Aesthetically pleasing through its smooth and shiny appearance

- No need to tape, paint or cover. Easy to clean and maintain

- Can be cleaned with a standard cloth

PROPERTIES of UVPLUS Cover Protection

Temperature Resistance = -40oC to +100oC

Permeability = Increased steam diffusion resistance (µ) more than 100%.

Thickness = 125 µm     Weight = 135 gr/m2      Lifespan (est.) = 10 years

Isolation Isopipe

Solar protection UV-plus